Knowledgebase: Programming
BaseStation 3200 – Programming the Controller to Pause Irrigation to Allow a Pond or Cistern to Refill
Posted by Leanne Lloyd-Fairey on 19 February 2014 02:39 PM

If your irrigation system is drawing water from a pond or a cistern while that reservoir is being filled from another water source, you might find that water is being used faster than it is being replenished. If you cannot increase the flow rate for the fill or decrease the usage rate, you might need to pause your irrigation programs while the reservoir refills to an acceptable level.

Find complete instructions for programming your BaseStation 3200 controller in the following PDF document:

Programming a BaseStation 3200 to Pause Irrigation to Allow a Pond or Cistern to Refill