Displaying Weather Station Information from the Map
Posted by Leanne Lloyd-Fairey on 07 March 2016 02:38 PM
  1. In the main BaseManager interface, click the Maps tab, and then navigate to the Site level. Markers for the weather stations that you have added to BaseManager automatically display on the map.
  2. Click on the weather station marker . The weather station pop-up box displays.
  3. Review the information in the pop-up box.
    • Description: The weather station that the controller is connected to. If you want to see details about the weather station in Weather Underground, click the weather station name.
    • ETo: This field shows the calculated amount of water (in inches) needed to replace the moisture lost to evapotranspiration (ET). This value is calculated daily.
    • Date: This field shows the most recent date and time when BaseManager captured data from the weather station to use in the ET calculations. The time in this field is relative to the weather station's time zone.
  4. Close the pop-up box by clicking the X in the upper-right corner.