Knowledgebase: Programming
BaseStation 1000 – Configuring Lower Threshold Moisture Sensor-based Watering
Posted by Leanne Lloyd-Fairey on 19 February 2014 01:13 PM

If you have a Baseline soil moisture sensor (biSensor™) installed in your landscaping and connected to your BaseStation 1000 irrigation controller, you can program the controller to water based on the moisture levels in the soil.

The BaseStation 1000 irrigation controller supports several biSensor-based watering strategies, but Baseline recommends the lower threshold (also referred to as “less than limit” or “lower limit”) configuration as a general watering strategy.

Find complete instructions for programming your BaseStation 1000 controller in the following PDF document:

Configuring Lower Threshold Moisture Sensor-based Watering on the BaseStation 1000 Controller