Knowledgebase: Programming
BaseStation 3200 – Programming the Controller to Keep a Pond or Cistern Full with a Start Condition
Posted by Leanne Lloyd-Fairey on 19 February 2014 02:19 PM

If you have a pond or a cistern that is fed from an external water source, you can use a Baseline biSensor moisture sensor with your BaseStation 3200 controller to monitor the water level in a pond or cistern and turn on a valve when the water drops below a specified level. Then, simply program the controller for the run time required to refill the pond or a cistern from a depleted level.

Find complete instructions for programming your BaseStation 3200 controller in the following PDF document:

Programming a BaseStation 3200 Controller to Keep a Pond or Cistern Full with a Start Condition