RSS Feed
Knowledgebase : Advanced Controller Programming
The practice of collecting rainwater to be used in irrigation has gained a great deal of attention in recent years. Interest in rainwater harvesting can be motivated by the need to have supplemental water available or by the need to control the runoff tha...
When water from a pond or a cistern is available for irrigation, a Baseline controller can be used to automate many of the potentially complex functions required to operate this type of water supply. To ensure that this water source works the way you ex...
When water from a pond or a cistern is available for irrigation, a Baseline irrigation controller can be used to automate many of the potentially complex functions required to operate this type of water supply - including keeping the pond or cistern full....
Irrigators often find that their water supply is limited due to restrictions enacted to conserve water during periods of drought or due to rising costs imposed by water providers. When irrigators have a limited water supply, they typically have to make ...
With the correct materials, you can set up your Baseline irrigation controller to have a connected 110V electrical circuit turn on/off based on the settings in a program. You could set up this system to control landscape lighting at your site, to operat...
Studies have shown that a properly configured soil moisture sensor can reduce outdoor water use by up to 62 percent or more over traditional irrigation methods. By watering your plants when needed, you can increase landscape health, promote deeper root gr...